|
Upgrading your headlights without proper wiring not only reduces the brightness of your new units but can also lead to costly electrical fires. The solution is a separate wiring circuit designed to handle your new high wattage bulbs. The Rennbay Headlight Relay Harness is all you need to have safer, brighter lighting in under an hour. Our relay harness is built specifically for the Porsche 944 and is a completely "plug and play" unit. All you do is plug two connectors into your bulbs, hook up the signal plug to one of your old bulb sockets, connect the power and ground then secure the relays to the fender wall. That's all there is to it. Below a little bit about the kit's components. 
A: Signal Connector (to old bulb socket)
B: Intagrated Fuse Holder
C: 12v Power Lead (to alternator)
D: Ground Lead (to grounding lug on frame)
E: Passeger Side Bulb Socket
F: Driver Side Bulb Socket All connections are soldered with heat shrink. Connectors are high temp rated. All wire runs are marine grade. 10 gauge power lead wires. 14 gauge between headlights, relays and signal plug. High temp protective mesh. Relays are standard "on the shelf" automotive type found at all auto parts stores. E-Code bulb housings, bulbs and adjustable voltage regulators will be available soon. Please check back here for more info on those items.
|
